Removing or disconnecting Sorein modulesUpdated 24 days ago

Sorein Power Station components (or "modules") include the following:

• Main Unit
• Extra Battery
• Extra Inverter

All of these can be stacked on the Off Road Aluminum Cart.

Separating an Extra Battery from the Off Road Cart

This cart has two small locking knobs (or "latches") on the front and rear ends of its base. When engaged, these knobs will secure the battery so that it cannot be separated from the cart.

The locked position for the knobs is "up", as shown in the photo below.

To release a battery module from the cart, make sure both knobs are down. Then, lift the component abruptly from the cart. If it doesn't release, check the position of both knobs and try again.

Be sure that you are only trying to remove one battery from the cart. It's not safe to try to lift more than one module at a time.

Separating Extra Battery modules

Open the side panels of all Extra Batteries. With the side panels open, you can see metal latches, one on each side of the battery. (See item 4 in the image below.) Slide the metal latches as indicated on the battery. This unlocks the unit above, so that it can be released.